89www.zcorp-users.com
CHANGING BINDER COLOR
Add the following mixtures of color binder to the ZPrinter 310 feed bottle (3/4 full with clear binder) to achieve
your desired color. These ratios are based on the 1.5 liters of clear binder in the feed bottle prior to adding any
color.
Hold the color binder bottle, with pump
attached, up to the opening of the ZPrinter
310 feed bottle and add the desired amount
of color binder. Each squirt is approximately
1 ounce of binder.
Darker or lighter shades of colors can be
achieved by adding more or less of the
corresponding desired color ratio (pink can
be achieved by cutting the quantity of total
color binder added by two). A part will
appear more vibrant after infiltration.
PLEASE NOTE: Higher concentrations of color binder than those stated above will
reduce print head life (less than 30 billion pixels). The reduction of print head life will
lead to premature head over temp errors and striping during print jobs.
Desired Color Cyan Magenta Yellow Black
Red - 18 Squirts 9 Squirts -
Magenta - 18 Squirts - -
Orange - 3 Squirts 12 Squirts -
Yellow - - 18 Squirts -
Green 3 Squirts - 12 Squirts -
Blue 18 Squirts 3 Squirts - -
Violet 9 Squirts 18 Squirts - -
Gray - - - 6-12 Squirts
Quantity of Color Binder Added to Feed
Bottle with Clear Binder
To Next Page
Loading...
