Zebra DS8108

User Preferences & Miscellaneous Options 9 - 21
Presentation (Hands-free) Decode Aiming Pattern
Parameter # 590
SSI # F1h 4Eh
Scan one of the following bar codes to select when to project the aiming pattern in hands-free mode:
• Enable Presentation (Hands-free) Decode Aiming Pattern - This projects the aiming pattern during bar
code capture.
• Disable Presentation (Hands-free) Decode Aiming Pattern - This turns the aiming pattern off.
• Enable Presentation (Hands-free) Decode Aiming Pattern on PDF - This projects the aiming pattern
when the scanner detects a PDF bar code.
NOTE With Picklist Mode on page 9-22 enabled, the decode aiming pattern flashes even when you disable the
Hands-free Decode Aiming Pattern.
Enable Presentation (Hands-free)
Decode Aiming Pattern
(1)
Disable Presentation (Hands-free)
Decode Aiming Pattern
(0)
*Enable Presentation (Hands-free)
Decode Aiming Pattern on PDF
(2)