Zebra DS8108 User Manual

9 - 26 DS8108 Digital Scanner Product Reference Guide
Triggered Timeout, Same Symbol
Parameter # 724 (SSI # F1h D4h)
Scan Enable Triggered Timeout, Same Symbol below to apply Timeout Between Decodes, Same Symbol
(parameter #137 on page 9-25) in hand-held trigger mode. Subsequent scans of Enable Triggered Timeout,
Same Symbol are ignored until Timeout Between Decodes, Same Symbol expires.
NOTE This feature does not apply to Timeout Between Decodes, Different Symbols.
NOTE Timeout Between Decodes, Same Symbol cannot be greater than or equal to the Time Delay to Low
Power Mode (parameter #146 on page
9-16).
Enable Triggered Timeout, Same Symbol
(1)
* Disable Triggered Timeout, Same Symbol
(0)

Zebra DS8108 Specifications

General

Cables included	USB
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Input voltage	5 V
Power consumption	450 mA
Power source type	-
PC connection	RS-232/USB
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP42
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	154 g