Zebra DS8108

xxii DS8108 Digital Scanner Product Reference Guide
• Italics are used to highlight the following:
• Chapters and sections in this guide
• Related documents
• Bold text is used to highlight the following:
• Parameter names and options
• Parameter bar code captions
• Dialog box, window, and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.
• Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential.
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
Related Documents and Software
The following documents provide more information about the DS8108 scanner and other reference information.
• DS8108 Quick Start Guide, p/n MN-002927-xx, provides general information for getting started with the
DS8108 scanner, and includes basic set up and operation instructions.
• Advanced Data Formatting Programmer Guide, p/n 72E-69680-xx, provides information on ADF, a means of
customizing data before transmission to a host.
• Multicode Data Formatting and Preferred Symbol, p/n MN-002895-xx, provides information on Multicode
Data Formatting (MDF), which enables a 2D imaging scanner to scan all bar codes on a label, and then
modify and transmit the data to meet host application requirements.
• Toshiba TEC Programmer’s Guide, p/n MN-002707-xx, provides information on programming the Toshiba
TEC USB device type.
For the latest version of this guide and all guides, go to: http://www.zebra.com/support.