Keyboard Wedge Interface 8 - 3
Keyboard Wedge Parameter Defaults
Table 8-1 lists defaults for keyboard wedge host parameters. Change these values in one of two ways:
•
Scan the appropriate bar codes in this chapter. The new value replaces the standard default value in
memory. To recall default parameter values, see Default Parameters on page 9-5.
•
Configure the scanner using the 123Scan
configuration program. See Chapter 16, 123Scan and Software
Tools.
NOTE See Appendix A, Standard Parameter Defaults for all user preference, host, symbology, and
miscellaneous default parameters.
Table 8-1 Keyboard Wedge Interface Parameter Defaults
Parameter Default
Page
Number
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM AT Notebook
8-4
Bar Codes with Unknown Characters Send Bar Codes with
Unknown Characters
8-4
Keystroke Delay No Delay
8-5
Intra-keystroke Delay Disable
8-5
Alternate Numeric Keypad Emulation Enable
8-6
Quick Keypad Emulation Enable
8-6
Simulated Caps Lock Disable
8-7
Caps Lock Override Disable
8-7
Convert Case Do Not Convert
8-8
Function Key Mapping Disable
8-8
FN1 Substitution Disable
8-9
Send Make and Break Send Make and Break Scan
Codes
8-9