APPENDIX A STANDARD PARAMETER
DEFAULTS
Table A-1 Parameter Defaults
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
Dump Scanner Parameters N/A N/A N/A
3-6
Report Software Version N/A N/A N/A
3-7
Serial Number N/A N/A N/A
3-7
Manufacturing Information N/A N/A N/A
3-7
USB Host Parameters
USB Device Type N/A N/A USB Keyboard HID
4-5
Symbol Native API (SNAPI) Status
Handshaking
N/A N/A Enable
4-7
USB Keystroke Delay N/A N/A No Delay
4-7
USB Caps Lock Override N/A N/A Disable
4-8
Bar Codes with Unknown Characters N/A N/A Send Bar Codes with
Unknown Characters
4-8
USB Convert Unknown to Code 39 N/A N/A Disable
4-9
USB Fast HID N/A N/A Enable
4-9
USB Polling Interval N/A N/A 3 msec
4-10
Keypad Emulation N/A N/A Enable
4-12
Quick Keypad Emulation N/A N/A Enable
4-12
Keypad Emulation with Leading Zero N/A N/A Enable
4-13
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.
To Next Page
Loading...
