Zebra DS8108

11 - 68 DS8108 Digital Scanner Product Reference Guide
Matrix 2 of 5
Parameter # 618
SSI # F1h 6Ah
Scan one of the following bar codes to enable or disable Matrix 2 of 5.
Set Lengths for Matrix 2 of 5
L1 = Parameter # 619
SSI # F1h 6Bh
L2 = Parameter # 620
SSI # F1h 6Ch
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths within a
specific range. The default is Length Within Range: 4 to 55.
Scan one of the following bar codes to select a length option:
• One Discrete Length - Decode only Matrix 2 of 5 symbols containing a selected length. Select the length
using the bar codes in Appendix B, Numeric Bar Codes. For example, to decode only Matrix 2 of 5 symbols
with 14 characters, scan Matrix 2 of 5 - One Discrete Length, and then scan 1, 4. To correct an error or
change the selection, scan Cancel on page B-3.
• Two Discrete Lengths - Decode only Matrix 2 of 5 symbols containing either of two lengths. Select
lengths using the bar codes in Appendix B, Numeric Bar Codes. For example, to decode only Matrix 2 of 5
symbols containing either 2 or 14 characters, scan Matrix 2 of 5 - Two Discrete Lengths, and then scan
0, 2, 1, 4. To correct an error or change the selection, scan Cancel on page B-3.
• Length Within Range - Decode Matrix 2 of 5 symbols with a specific length range. Select lengths using
the bar codes in Appendix B, Numeric Bar Codes. For example, to decode Matrix 2 of 5 symbols
containing between 4 and 12 characters, scan Matrix 2 of 5 - Length Within Range, and then scan 0, 4, 1,
2. To correct an error or change the selection, scan Cancel on page B-3.
Enable Matrix 2 of 5
(1)
*Disable Matrix 2 of 5
(0)
NOTE When setting lengths, enter a leading zero for single digit numbers.