9 - 20 DS8108 Digital Scanner Product Reference Guide
Hand-held Decode Aiming Pattern
Parameter # 306
SSI # F0h 32h
Scan one of the following bar codes to select when to project the aiming pattern in hand-held mode:
•
Enable Hand-held Decode Aiming Pattern - This projects the aiming pattern during bar code capture.
•
Disable Hand-held Decode Aiming Pattern - This turns the aiming pattern off.
•
Enable Hand-held Decode Aiming Pattern on PDF - This projects the aiming pattern when the scanner
detects a PDF bar code.
NOTE With Picklist Mode on page 9-22 enabled, the decode aiming pattern flashes even if you disable the
Hand-held Decode Aiming Pattern.
*Enable Hand-held Decode Aiming Pattern
(2)
Disable Hand-held Decode Aiming Pattern
(0)
Enable Hand-held Decode Aiming Pattern on PDF
(3)
To Next Page
Loading...
