Zebra DS8108 User Manual

CHAPTER 13 INTELLIGENT
DOCUMENT CAPTURE
Introduction
Intelligent Document Capture (IDC) is Zebra advanced image processing firmware for select imager based
scanners. This chapter describes the IDC functionality, provides parameter bar codes to control IDC features, and
includes a quick start procedure.
The IDC Process
Intelligent Document Capture:
1. Verifies a bar code is appropriate to use as an IDC anchor or link. See Bar Code Acceptance Test.
2. Determines the rectangular region to capture as an image. See Capture Region Determination on page 13-2.
3. Processes the captured image. See Image Post Processing on page 13-3.
4. Transmits the data. See Data Transmission on page 13-3.

Zebra DS8108 Specifications

General

Cables included	USB
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Input voltage	5 V
Power consumption	450 mA
Power source type	-
PC connection	RS-232/USB
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP42
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	154 g