Zebra DS8108 User Manual

11 - 74 DS8108 Digital Scanner Product Reference Guide
GS1 DataBar Expanded
Parameter # 340
SSI # F0h 54h
Convert GS1 DataBar to UPC/EAN/JAN
Parameter # 397
SSI # F0h, 8Dh
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols not decoded as
part of a Composite symbol. Scan Enable Convert GS1 DataBar to UPC/EAN/JAN to strip the leading '010' from
DataBar-14 and DataBar Limited symbols encoding a single zero as the first digit, and report the bar code as
EAN-13.
For bar codes beginning with between two and five zeros, this strips the leading '0100' and reports the bar code as
UPC-A. The UPC-A Preamble option that transmits the system character and country code applies to converted
bar codes. Note that neither the system character nor the check digit can be stripped.
*Enable GS1 DataBar Expanded
(1)
Disable GS1 DataBar Expanded
(0)
Enable Convert GS1 DataBar to UPC/EAN/JAN
(1)
*Disable Convert GS1 DataBar to UPC/EAN/JAN
(0)

Zebra DS8108 Specifications

General

Cables included	USB
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Input voltage	5 V
Power consumption	450 mA
Power source type	-
PC connection	RS-232/USB
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP42
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	154 g