Zebra DS8108

6 - 16 DS8108 Digital Scanner Product Reference Guide
RTS Line State
Scan one of the following bar codes to set the idle state of the serial host RTS line to Low RTS or High RTS.
Beep on <BEL>
Scan one of the following bar codes to set whether the scanner issues a beep when it detects a <BEL> character
on the RS-232 serial line. <BEL> indicates an illegal entry or other important event.
*Host: Low RTS
Host: High RTS
Beep On <BEL> Character
(Enable)
*Do Not Beep On <BEL> Character
(Disable)