9 - 18 DS8108 Digital Scanner Product Reference Guide
Hand-held Trigger Mode
Parameter # 138
SSI # 8Ah
Scan one of the following bar codes to select a trigger mode for the scanner:
•
Standard (Level) - A trigger press activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout on page 9-24 occurs.
•
Presentation (Blink) - The scanner activates decode processing when it detects a bar code in its field of
view. After a period of non-use, the LEDs turn off until the scanner senses motion.
•
*Auto Aim - The scanner projects the aiming pattern when lifted. A trigger press activates decode
processing. After a period of inactivity the aiming pattern shuts off.
Standard (Level)
(0)
Presentation (Blink)
(7)
*Auto Aim
(9)
To Next Page
Loading...
