Safety instructions
7-13CenterMax Operating Instructions61211-1020202
Safety instructions
Danger!
There is a risk of injuries during all movements of the CMM.
• Ensure that nobody is at risk during manual operation of the
machine.
• Keep a safe distance away from to the CMM during automatic
measuring runs.
Danger!
The CMM is provided with a protective circuit which monitors the
driving forces during movements of the bridge in the x and y axes. If a
collision occurs, the protective circuit causes the drives to be cut out.
The function of the protective circuit must be checked regularly in
order to guarantee the safety of the CMM.
• Check the function of the protective circuit every month
➤ page 6-8.
Important!
Radio signals may interfere with operation of the CMM.
• Therefore, do not use any mobile phones or walkie-talkies within a
3m radius of the CMM.
Important!
For calibration, the same measuring force and clamping of the axes
must be set as later for workpiece measurement.
• Perform the calibration in the same way as you intend to probe the
workpiece later on, i.e. with the same measuring force and axis
clamping.
!
!
!
!
To Next Page