2-12
Description of the CMM
61211-1020202 CenterMax Operating Instructions
If the joysticks are not activated within a certain period of time, they
will be blocked. The blocking must be cancelled before it is possible to
carry out travel movements by means of the joystick ➤ Operating
instructions for the control panel.
Calibration standard
A high-precision sphere is used as the calibration standard. The sphere
is made of a ceramic material and has a diameter of 30mm.
The calibration standard shown is included in the scope of delivery.
The calibration standard has a magnetic stand.
1 Calibration sphere
2 Rotary switch for activating the magnet
3Magnetic stand
A metal plate is required for mounting the calibration standard on the
measuring table. This plate is delivered with the calibration standard.
For more information see ➤“Mounting the calibration standard on
the measuring table” on page 7-18.
Direction of
rotation of
the rotary
table
(option)
• Push to the left.
The rotary table turns
clockwise.
• Push to the right.
The rotary table turns
counterclockwise.
Direction Action Left joystick
NOTE
1
2
3
NOTE
To Next Page
Loading...
