9-2
Maintenance and care
61211-1020202 CenterMax Operating Instructions
Maintenance
Purpose of mainte-
nance work
Proper maintenance ensures …
– safe measuring operation,
– that there are no downtimes,
– that the CMM always measures with maximum accuracy.
In order to guarantee these features in the long run, the CMM
requires regular maintenance.
Danger!
Maintenance work must be carried out only by skilled personnel.
These persons must have received special training on the correspond-
ing CMM qualifying them to carry out all necessary maintenance
work.
Maintenance agree-
ments
We recommend concluding a maintenance agreement to guarantee
safe operation. ZEISS offers maintenance agreements which relieve
you of any need to worry about maintenance.
• If you would like to subsequently conclude a maintenance agree-
ment retrospectively, call our hotline.
The phone number of our hotline is: +49 (0)180/3336337.
Regarding maintenance work, a distinction is made between
maintenance and machine care.
Maintenance:
– Preventive maintenance is performed on all components according
to the work plans.
– Inspection of precision, adjustment and calibration.
– Replacement of wearing parts.
Machine care:
– Preventive maintenance is performed on defined components
according to the working plans.
– Verification and correction of geometry and calibration.
– Replacement of wearing parts.
Maintenance intervals The time intervals between two maintenance calls depend on the
degree of utilization. Generally, maintenance should be carried out at
at least every 2000 operating hours.
!
To Next Page
Loading...
