2-26
Description of the CMM
61211-1020202 CenterMax Operating Instructions
Probe rack
Components of the probe rack
Probe racks supplied for retrofitting purposes are delivered unassem-
bled.
Scope of delivery:
– Profile rail for fastening the holders.
– Holders (storage positions):
8 holders belong to a probe rack.
The holders are preassembled.
– Screws and mounting aids.
Probe system order
numbers
Two probe racks are available for CenterMax. One rack is included in
the standard version and the other rack can be ordered:
The probe rack with the order no. 1038-093 is mounted at the drive
end. However, the measuring range in the x direction is reduced.
Order no.
1038-094 Included in the CenterMax standard
version
1038-093 Option
NOTE
To Next Page
Loading...
