5-4
Preparations for start-up
61211-1020202 CenterMax Operating Instructions
• Observe the requirements regarding the compressed-air supply in
the chapter "Technical data“ ➤ page 3-3.
For more information on the connection of the compressed-air supply,
please refer to the document "Installation Instructions“.
Requirements for compressed-air supply
Pressure in the supply line:
– Required minimum pressure: 6bar
– Permissible maximum pressure: 10bar.
Quality of the compressed air:
– Degree of purity 99%
– Free from solid particles
– Free from water – in liquid or gaseous form
– Free from oil – in liquid or gaseous form.
Compressed-air connection to the CMM
The compressed-air connection is located on the right-hand side of
the CMM behind the doors.
1 CMM (top plan view)
2 Compressed-air connection of the CMM on the right-hand side
➤ page 5-5
3 Compressed-air supply at the installation site.
The connection for the dampers of the CenterMax is located behind
the left door. The connections for the axes and the special equipment
are located behind the middle door.
NOTE
2
3
1
To Next Page
Loading...
