1-4
Introduction
61211-1020202 CenterMax Operating Instructions
Additional documents
Separate documents
Components for which separate documents are available are referred
to in these operating instructions.
Separate documents are available for the following components:
Standard The following documents are delivered with each CMM:
– General safety instructions
– Control console – standard.
Option The following document is delivered if the CMM is equipped with the
corresponding option.
– Loading device.
Supplementary literature
"Einfach messen – und was Sie dazu wissen sollten". The primer of
measurement technology.
Carl Zeiss, Unternehmensbereich Industrielle Messtechnik, order no.:
612302-9002.
To Next Page
Loading...
