Foreword 61211-1020202 Operating Instructions
Symbols / danger warnings
Three special symbols which always denote important information are
used in this manual.
These symbols appear in the left-hand margin of the page and directly
adjacent to the corresponding text.
Danger!
Special caution is advisable here. The warning triangle and the adja-
cent text indicate a possible danger of injury.
Failure to observe this warning may result in injury to the operator.
Important!
This symbol warns you of situations which might cause measuring
errors, interfere with a measuring run or even lead to collisions result-
ing in damage to the CMM and/or the workpiece.
This symbol indicates additional and helpful information.
For your orientation
The following typographical conventions are used in this manual:
!
!
NOTE
Example Description
not – Words are emphasized by placing them in
italics.
– Italics are often used to set apart an inter-
mediate heading, e.g. Type of
measurement:
Protective circuit Specially emphasized words are printed in
bold type.
no grease film Words specially emphasized in warnings are
also printed in bold type.
Blue bold type is sometimes used to mark a
listing, e.g.
ST-ATAC: ...
VAST: ...
➤"Measurement“ on
page ...
➤ Page ...
Reference to a text passage where you can
find more information.
To Next Page
Loading...
