Zeiss CenterMax - Safety of the Machine; Standards and Regulations

General information
1-3CenterMax Operating Instructions61211-1020202
Safety of the machine
Approvals for the CMM:
Standards and regulations
The CMM is designed, manufactured and tested according to the fol-
lowing standards and regulations:
Regulations – BGV A1 (VBG 1): Accident prevention regulations –
General regulations
– BGV A2 (VBG 4): Accident prevention regulations –
Electrical systems and equipment
Standards – DIN/VDE 0100:
Regulations for electric power installations with nominal voltages
of up to 1000V
– EN 61010 part 1:
Measuring machines, control units, controllers and laboratory
equipment
– EN 60204 part 1:
Safety of machines – electrical equipment of machines
– EN 292, part 1:
Safety of machines – basic terminology
– EN 292, part 2:
Safety of machines – technical directives and specifications
– EN 61326:
EMC – interference immunity; interference emission, class A
– CSA C22.2 No. 1010.1:
Safety requirements for Electrical Equipment for measurement,
control and laboratory use.
– UL 3101-1:
Standard for Electrical Equipment for Laboratory use.
Europe GS marking of the professional associations of
precision engineering and electrical engineering.