Safety
1-9CenterMax Operating Instructions61211-1020202
Safety
Requirements for person responsible for
CMM
The person responsible for the CMM must ensure that:
– The installation site requirements are met.
– The operator has been properly instructed regarding handling and
operation of the CMM.
– The operator has received the operating instructions for working
with the CMM. The operating instructions must be suitable for all
local and operating conditions and available in the language spo-
ken by the operating personnel.
The operating instructions must always be available within easy
reach of the CMM.
– The operator must know and observe the safety instructions.
– Maintenance work and work on electrical equipment must be car-
ried out only by competent specialists.
Definition of a specialist
A specialist is a person who due to his
– training
– experience
– instruction
and knowledge of
– relevant standards
– legal regulations
– accident prevention regulations
– and operating conditions
has been authorized by the safety officer responsible for the CMM to
perform the currently required actions and therefore is in a position to
recognize and avoid potential dangers.
To Next Page
Loading...
