Probe system
2-17CenterMax Operating Instructions61211-1020202
Torque
The maximum torque of the probe is 0.1Nm.
Important!
The weight of all components and the length of the probe styli, exten-
sions and joining elements must be considered when assembling
probes.
• Observe also the weights indicated for the individual probes, join-
ing elements and the adapter plate when assembling probes.
• Observe the lengths indicated for the probes, extensions and other
joining elements when assembling probes.
Temperature-sensing probe
Application
The temperature-sensing probe is used to measure the the tempera-
ture of the workpiece surface and the surrounding air. Both measure-
ments can also be carried out via a CNC program. Thus, temperature
monitoring is possible throughout the entire measurement.
The VAST probe system is required for the operation of a tempera-
ture-sensing probe.
For more information see ➤“Notes on temperature measurement” on
page 7-9 and ➤“Possibilities” on page 7-10.
!
NOTE
To Next Page
Loading...
