Maintenance
9-3CenterMax Operating Instructions61211-1020202
We recommend:
Scope of maintenance work
Maintenance work includes inspection of the following:
When concluding a maintenance agreement, you also must specify
any optional equipment to be covered.
Degree of utilization Scope of annual maintenance
work
1-shift operation: 1 x maintenance
2-shift operation 1×maintenance + 1×machine care
3-shift operation 2×maintenance
Components Examples
Safety devices (standard
equipment)
For example drive monitoring; colli-
sion protection in the Series measure-
ment mode
Compressed-air supply For example air bearings, pressure
controller, air filters, valves
Measuring system For example functioning, precision
Control For example operator’s controls on
the control cabinet; control panel
NOTE
To Next Page
Loading...
