Components and their functions
2-11CenterMax Operating Instructions61211-1020202
Deflect the joystick in the direction required to move the probe
toward the workpiece. The right joystick is used to execute the fol-
lowing actions:
You may reverse the travel direction of the joysticks. This is advisable
when operating the control console and performing probing from
behind the CMM.
You can reverse the travel direction by pressing a button on the con-
trol console ➤ Operating instructions for the control console.
Left joystick
z direction and direc-
tion of rotation of the
rotary table (option)
The left joystick is used to move the quill in the z direction.
Axis /
Direction
Action Right joystick
x direction -x • Push to the left.
The quill moves to the
left.
+x • Push to the right.
The quill moves to the
right.
y direction -y • Push to the rear.
The bridge moves
away from the opera-
tor.
+y • Pull to the front.
The bridge moves
towards the operator.
-x +x
-y
+y
NOTE
Direction Action Left joystick
z direction -z • Push to the rear.
The quill moves
downwards.
+z • Pull to the front.
The quill moves
upwards.
-z
+z
To Next Page
Loading...
