5-161211-1020202 CenterMax Operating Instructions
Chapter
.................................................................................................................................
5 Preparations for start-up
The preparations include many activities not performed daily or
weekly. One exception to this is the visual check. The visual check
should be part of your routine daily measuring operation.
It is possible that the probe rack must be removed, replaced or modi-
fied. In this case, please refer to the corresponding information in this
chapter.
This chapter contains:
Before you start! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mounting the probe rack (option) . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Visual check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Start-up preparation checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To Next Page
Loading...
