Zetor CRYSTAL Series User Manual

After about three seconds the main screen is displayed on
the display.
In the main field (1) the travel speed of the tractor is
displayed. In the secondary field (2) the current time in 24-
hour format is displayed.
C15N031
There are data regarding PTO shafts in this screen
.
1. Front PTO shaft revolutions, if the shaft is activated.
2. Rear PTO shaft revolutions, when the shaft is switched
on.
3. Tractor travel speed.
C15N032
In the main field (1) the total moto hours worked by the
tractor are displayed.
In the secondary field (2) the total moto hours worked by
the tractor from the last resetting of the data are displayed.
C15N033
In the main field (1) the total kilometres worked by the
tractor are displayed.
In the secondary field (2) the number of kilometres
travelled by the tractor from the last resetting of the data is
displayed.
C15N034
DASHBOARD
46

Zetor CRYSTAL Series Specifications

General

Transmission	Mechanical or PowerShift
Aspiration	Turbocharged
Hydraulic System	Load Sensing (LS)
Cylinders	6
Hydraulic System Type	Load Sensing (LS)
PTO Speed	540/1000 rpm
Weight Approx	3, 800-5, 500 kg