Zetor CRYSTAL Series User Manual

There are data regarding the automatic switching off of the
rear PTO shaft; more information is available in the
chapter Power of Agricultural Machines.
C15N035
In the main field (1) the voltage of the accumulator battery
is displayed.
C15N036
In the main field (1) the total amount of the fuel consumed
from the engine start is displayed. The entry is
automatically cleared after two hours from the engine
start. In the secondary field (2) the immediate
consumption of the fuel is displayed. The entry is
automatically cleared when the engine is switched off.
C15N037
In the main field (1) the processed area in hectares is
displayed.
In the secondary field (2) the hourly output, i.e. the
average of the processed area in hectares per hour, is
displayed.
C15N038
DASHBOARD
47

Zetor CRYSTAL Series Specifications

General

Transmission	Mechanical or PowerShift
Aspiration	Turbocharged
Hydraulic System	Load Sensing (LS)
Cylinders	6
Hydraulic System Type	Load Sensing (LS)
PTO Speed	540/1000 rpm
Weight Approx	3, 800-5, 500 kg