Zte ZXR10 2900 Series - Page 80

ZXR102900SeriesUserManual
CommandFunction
zte(cfg)#setport<port-list>
mac-learning{enable|disable}
Thisenablesordisables
portmac-learning.
ThiscontrolsMAC
learningonport.The
functionisdisabledby
default.Itlearnsand
forwardstheaccessing
packetonport.
zte(cfg)#setport<portlist>acl
<acl-number>{enable|disable}
Thiscongurestheport
bindwithACLrule.
zte(cfg)#setport<portlist>vlanjump
{enable[defaultauthvlan<1-4094>]|
disable}
Thisconguresthe
VLANthat802.1x
unauthorizationuser
canaccess.
Thisfunctionis
mainlyusedwithuser
accessing.
zte(cfg)#setport<portlist>vlan-attrib
ute<vlanlist>{untag|tag}
Thiscongures
thecorresponding
congurationbetween
portandvlan.
Theportandvlanhas
tobeconguredoneto
one.
zte(cfg)#setqueue-schedulefeport
<portlist>{wrr0|wrr1-sp|wrr2-sp|
sp}
Thissetsthe
queue-schedulemode
of100Mbpsport.
Thiscommandrelates
toQoSandsetsthe
queue-schedulemode
on100Mbpsport.
�wrr0
queue-schedule
mode0:
WRRWRRWRRWRR
�SP
queue-schedule
mode1:SPSPSPSP
�WRR1-SP
queue-schedule
mode2:
WRRWRRWRRSP
�WRR2-SP
queue-schedule
mode3:
WRRWRRSPSP
zte(cfg)#setqueue-schedulegeport
<portlist>session<0,1>
Thissetsthe
queue-schedulemode
ofgigabitport
Thiscommandrelates
toQoSconguration.
68CondentialandProprietaryInformationofZTECORPORATION