Zte ZXR10 2900E Series - Page 123

Chapter5ServiceConguration
CommandFunction
zte(cfg-nas)#dot1xre-authenticate{enable|disable}Enablesordisables
re-authenticationfunction.
zte(cfg-nas)#dot1xre-authenticateperiod<1-4294967295>Setsthetimeintervalfor
re-authentication.
zte(cfg-nas)#dot1xquiet-period<0-65535>Setsquietperiodofauthentication.
zte(cfg-nas)#dot1xtx-period<1-65535>Setsthetimethatthe
authenticationsystemneeds
towaitbeforeitcanretransmit
theEAPOLdatapacketbecause
itdoesnotreceivetheresponse
fromtheclient.
zte(cfg-nas)#dot1xsupplicant-timeout<1-65535>Setsthetime-outtimeforthe
authenticationsystemtoreceive
thedatapacketsfromthe
authenticationclientsystem.
zte(cfg-nas)#dot1xserver-timeout<1-65535>Setsthetime-outtimeforthe
authenticationsystemtoreceive
thedatapacketsfromthe
authenticationserver.
zte(cfg-nas)#dot1xmax-request<1-10>Setsthemaximumtimesof
requestretransmissionwhen
thetimerexpiresbeforethe
authenticationsystemreceives
theChallengeresponsefromthe
client.
zte(cfg-nas)#dot1xaddvlan<1-4094>[mac<HH.HH.HH.HH
.HH.HH>]
SetstheprivateMACaddressthat
DOT1Xprotocolcanuse.
zte(cfg-nas)#dot1xdeletevlan<1-4094>DeletestheprivateMACaddress
thatDOT1Xprotocolcanuse.
zte(cfg-nas)#clearclientDeletesallclients.
zte(cfg-nas)#clearclientindex<0-255>Clearsthespeciedclient.
zte(cfg-nas)#clearclient{port<portlist>|vlan<vlanlist>}Deletestheclientenduserof
speciedport/VLAN.
showdot1x(allcongurationmodes)Displays802.1xconguration
information.
showclient(allcongurationmodes)Displaystheinformationofall
accessusers.
5-75
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential