Zte ZXR10 2900E Series - Figure 5-36 PPPOE-PLUS Configuration Instance Topology

Chapter5ServiceConguration
ConguringPPPoE-PLUS
ThecongurationofPPPoE-PLUS(PPPoE+)includesthefollowingcontents:
CommandFunction
zte(cfg)#setpppoe-plus{enable|disable}EnablesordisablesthePPPoE+
function.
zte(cfg)#setpppoe-plustag-formatport<portlist>{dsl-forum|
cisco|china-tel|manual<string>|key<string>}
SetsthePPPoE+location
messageformat.
zte(cfg)#setpppoe-plusrid<portlist>[<string>]Addsordeletesportrid
information.
showpppoe-plus(allcongurationmodes)DisplaysPPPoE+global
conguration.
showpppoe-plusport<1-28>(allcongurationmodes)Displaysportridconguration.
zte(cfg)#setpppoe-plusmodeport<portlist>{default|drop|
modify}
Setsthemodefordynamicuser
informationprocessingattheport.
PPPoE-PLUSCongurationInstance
lCongurationDescription
ConguretheuserinformationformatofswitchAasDSLforumformat.SeeFigure
5-36.
Figure5-36PPPOE-PLUSCongurationInstanceTopology
lCongurationProcedure
CongureswitchA
zte(cfg)#setpppoe-plusenable
zte(cfg)#setpppoe-plustag-formatport1dsl-forum
lCongurationVerication
zte(cfg)#showpppoe-plus
PPPoEplusisenabled.
zte(cfg)#showpppoe-plusport1
PPPoEVendor-SpecificTagformatonport1:DSL-Forum
PPPoE-PLUSoptionmodeinformationonport1:Default
PPPoEVSTremoteIDonport1hasnotbeenset.
5-107
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential