Zte ZXR10 2900E Series - Figure 6-17 Changeover Rules of Roles

Chapter6Management
Figure6-17ChangeoverRulesofRoles
ZGMPConguration
TheZGMPcongurationincludesthefollowingcommands:
CommandFunction
zte(cfg-group)#setzdp{enable|disable}EnablesordisablestheZTE
DiscoveryProtocol(ZDP)function.
zte(cfg-group)#setzdp{port<portlist>|trunk
<trunklist>}{enable|disable}
EnablesordisablestheZDP
functionbasedonport/trunk.
zte(cfg-group)#setzdptimer<5-255>Setsatimeintervalforsending
ZDPpackets.
zte(cfg-group)#setzdpholdtime<10-255>SetsZDPholdtime.
showzdp(allcongurationmodes)DisplaysZDPglobalconguration.
showzdpneighbour(allcongurationmodes)DisplaysZDPneighbor
information.
showzdpneighbourdetail(allcongurationmodes)DisplaysdetailedZDPneighbor
information.
zte(cfg-group)#setztp{enable|disable}EnablesordisablestheglobalZTE
TopologyProtocol(ZTP)function.
zte(cfg-group)#setztp{port<portlist>|trunk
<trunklist>}{enable|disable}
EnablesordisablestheZTP
functionbasedonport/trunk.
zte(cfg-group)#setztpvlan<1-4094>SetsaVLANforcollecting
topologyinformation.
6-23
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential