Zte ZXR10 2900E Series - Figure 5-30 GVRP Configuration Instance

ZXR102900ESeriesCongurationGuide
Figure5-30GVRPCongurationInstance
lCongurationProcedure
1.CongurationofswitchA:
zte(cfg)#setgarpenable
zte(cfg)#setgvrpenable
zte(cfg)#setgvrpport1enable
zte(cfg)#setvlan10-20enable
zte(cfg)#setvlan10-20addport1
2.CongurationofswitchB:
zte(cfg)#setgarpenable
zte(cfg)#setgvrpenable
zte(cfg)#setgvrpport1enable
zte(cfg)#setvlan30-40enable
zte(cfg)#setvlan30-40addport1
Note:
1.TheGARPfunctionmustbeenabledrstbeforetheGVRPfunctionisenabled.
2.EnablingGVRPcanenableupto512vlans.
3.TimerofGarpusesthedefaultvalue.Ifitismodied,thevaluemustbethesame
astheoneconguredinthenetwork.
4.GvrpportregistrationtypeusesdefaultNormalvalue.Ifitismodiedtoother
types,vlanlearningcannotbeimplemented.
lCongurationVerication
SwitchA(cfg)#showgarp/*ViewGARPconfiguration*/
GARPisenabled!
GARPTimers:
HoldTimeout:100milliseconds
JoinTimeout:200milliseconds
LeaveTimeout:600milliseconds
LeaveAllTimeout:10000milliseconds
SwitchA(cfg)#showgvrp/*ViewGVRPconfiguration*/
GVRPisenabled!
PortIdStatusRegistrationLastPduOrigin
-------------------------------------------
1EnabledNormal00.d0.d0.f2.51.24
SwitchA(cfg)#showport1vlan
PortId:1
5-94
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential