Zte ZXR10 2900E Series - Configuration

ZXR102900ESeriesCongurationGuide
zte(cfg)#createcfmmd-session1ma-session1rmep-session2rmep-id1
remote-mac00.d0.d0.c0.00.01
zte(cfg)#cfmmd-session1ma-session1mep-id1ccm-receiveenable
5.43Y.1731Conguration
Y.1731Overview
TheY .1731protocolcomplementsthe802.1agprotocol.Itdenesaseriesofextensions
inwhichCFMisusedtomeasurethenetworklinkstatusandperformance.
TheY .1731protocolisusedin:
lTheerrormanagementOAM:AlarmIndicationSignal(AIS),Locked(LCK),Remote
DefectIndication(RDI)andfunctionsmentionedin802.1ag(CCM,LB,LT).
lTheperformancemanagementOAM:LossMeasurement(LM),andDelay
Measurement(DM).
Y.1731Conguration
Y .1731congurationincludesthefollowingcommands:
CommandFunction
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>one-lm{enable|disable}
EnablestheLMfunctionatone
end.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>two-lm{enable|disable}
EnablestheLMfunctionatboth
ends.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>two-dm{enable|disable}
EnablestheDMfunctioninboth
directions.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>ais{enable|disable}
EnablestheAISfunction.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>lck{enable|disable}
EnablestheLCKfunction.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>client-level<0-7>
Setsthelevelthatsendingthe
AIS/LCKfunctiontoouterlayers.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>relate-tormep-id<1-8191>
SetstheremoteMEPrelatedto
localMEP .
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>one-lmsend-packet[continue-time<60-600>interval
<1-60>]
StartsLMdetectionatoneend.
zte(cfg)#cfmmd-session<1-16>ma-session<1-32>mep-id
<1-8191>one-lmsend-packetstop
StopsLMdetectionatoneend.
5-154
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential