Zte ZXR10 2900E Series - Figure 5-21 Using Chap Mode for Identity Authentication; Figure 5-22 Using EAP Mode for Identity Authentication

ZXR102900ESeriesCongurationGuide
Figure5-21UsingChapModeforIdentityAuthentication
lExtensibleAuthenticationProtocol-MessageDigest5(EAP-MD5)
EAPisatypeofauthenticationmodeoftransmittingEAPmessagetransparently
includingEAP-MD5andPEAP .ThefollowingexampleisaboutEAP-MD5description.
EAP-MD5isaCHAPidentityauthenticationmechanismusedintheEAPframework
structure.FortheprocessofusingtheEAP-MD5modeforidentityauthentication,
seeFigure5-22.
Figure5-22UsingEAPModeforIdentityAuthentication
ConguringAccessService
Theaccessservicecongurationincludesthefollowingcommands:
CommandFunction
zte(cfg)#setport<portlist>vlanjump{enable[defaultauthvlan
<1-4094>]|disable]}
Enablesordisablesthevlanjump
afteruser802.1xauthentication.
5-74
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential