Zte ZXR10 2900E Series - Page 172

ZXR102900ESeriesCongurationGuide
StepCommandFunction
2ZXR10(config)#setzessdomain<1-4>mode
{revertive|non_revertive}
CongurestheZESSswitchingmode.The
defaultvalueisreversalmode.
HerearetwoZESSswitchingmodes:
lRevertive:reversalmode.
lNon_revertive:non-reversalmode.
3ZXR10(config)#setzessdomain<1-4>
ctrl-vlan<1-4094>
ConguresthecontrolVLAN.
4ZXR10(config)#setzessdomain<1-4>
preup<1-600>
Conguresthepreuptime(s).Default:5.
Thepreuptimeisusedinreversalmode.
Intheconditionthattheprimarylinkis
disconnectedandthesecondarylinkisin
usefordataforwarding,iftheprimarylink
recoversfromdisconnection,ZESSdoes
notswitchthedatatrafctotheprimary
linkimmediately.Itwaitsforthepreup
timebeforeitimplementstheswitching,to
preventtheswitchingfromoccurringwhen
theprimarylinkrecoveryisstillunstable.
5ZXR10(config)#setzessreceive-vlan
<1-4094>{port<port-name>|trunk
<trunk-name>}
Conguresaporttoenablethecapabilityof
receivingFlushpacketsfromadesignated
controlVLAN.
6ZXR10(config)#clearzessreceive-vlan
{<1-4094>|all}
ClearstheFlushpacketreceivingcapability
ofaport.
ZESSCongurationExample
Figure5-44showstheZESSnetworkingconguration.SwitchBandswitchCareinthe
topnetwork.SwitchAisconguredasaZESSnode.Here,ZESSisusedforsingle-device
dual-uplinkbackuptoachievetheEthernetsmartswitchfunction.
SwitchAisconguredwithtwoZESSdomains.Toachieveloadbalancing,theprimary
andsecondaryportsofonedomainoperateasthesecondaryandprimaryportsofthe
otherdomain,respectively.
lInZESSdomain1,thecontrolVLANisVLAN4000,theprotectioninstanceisinstance
1,theprimaryportisport_1/1andthesecondaryportisport_1/2.
lInZESSdomain2,thecontrolVLANisVLAN4001,theprotectioninstanceisinstance
2,theprimaryportisport_1/2andthesecondaryportisport_1/1.
ThecapabilityofreceivingFlushpacketsfromthecontrolVLANsVLAN4000and
VLAN4001isenabledonrelevantportsofswitchBandswitchC.
5-124
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential