Zte ZXR10 2900E Series - Page 255

Chapter6Management
CommandFunction
zte(cfg-group)#setgroupmac-mode{standard|extend[mac
<HH.HH.HH.HH.HH.HH>]}
Setsaprotocolmulticastaddress
ofclustermanagement.
zte(cfg-group)#setgroupsyslogsvr<A.B.C.D>SetsanIPaddressoftheSYSLOG
serverinacluster.
zte(cfg-group)#setgrouptftpsvr<A.B.C.D>SetsanIPaddressoftheTFTP
serverinacluster.
showgroup(allcongurationmodes)Displaysclusterconguration
information.
showgroupcandidate(allcongurationmodes)Displayscandidateswitches.
showgroupmember[<1-253>](allcongurationmodes)Displaysamemberswitchorall
memberswitches.
zte(cfg-group)#savemember{<idlist>|all}Savesthecongurationofa
memberswitchtoale.
zte(cfg-group)#erasemember{<idlist>|all}Deletesthecongurationofa
memberswitch.
zte(cfg-group)#rebootmember{<idlist>|all}Restartsamemberswitch.
rlogin{commander|member<1-253>}(allcongurationmodes)Remotelylogsintothecluster
device.
ZGMPCongurationInstance
lCongurationDescription
SeeFigure6-18,theinitialcongurationoftheswitchesisthedefaultconguration.
Here,settheVLANwherethepublicnetworkIPaddressofthecommandswitchin
theclusterresidesto2525,theIPaddressto100.1.1.10/24,thegatewayaddress
to100.1.1.1,theclustermanagementVLANto4000,theprivateaddresspoolto
192.168.1.0/24,andtheIPaddressoftheTFTPServerintheclusterto110.1.1.2.
6-25
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential