Zte ZXR10 2900E Series - Page 77

Chapter5ServiceConguration
CommandFunction
zte(cfg-nas)#iptvprvautoreset-time<HH:MM:SS>Automaticallyresetsthepreview
function.
zte(cfg-nas)#iptvprvrecognition-time<1-65534>Setsrecognitiontime.Ashorttime
previewisnotcounted.
zte(cfg-nas)#iptvprvovercount-cdr{enable|disable}EnablesordisablestheIPTV
previewovercount-cdrfunction.
zte(cfg-nas)#iptvview-profilename<viewfile-name>[id
<1-1023>]
CreatesIPTVpreview
congurationles.
zte(cfg-nas)#iptvview-profilename<viewfile-name>{count
<1-65535>|duration<2-65535>|blackout<2-65535>}
CreatesIPTVpreview
congurationles.
zte(cfg-nas)#iptvcac-rule{enable|disable}EnablesordisablestheCAC
control.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]service{start|
remove|pause|resume}
Setsuserservicestate.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]control-mode
{package|channel}
Setsusermulticastcontrolmode.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]package
{name<package-name>|id-list<package-list>}
Allocatespackagesfortheuser.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]channel
{name<channel-name>|id-list<channel-list>}{deny|order|
preview|query}
Allocatestheaccesspermissionof
thechannelfortheuser.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]cdr{enable|
disable}
EnablesordisablestheuserCDR
logrecordfunction.
zte(cfg-nas)#iptvport<portlist>[vlan<1-4094>]mac-base
{enable|disable}
Enablesordisablesthe
managementmodebasedon
theMACaddress.
zte(cfg-nas)#iptvport<portlist>{add|delete}mvlan<1-4094>
uvlan<1-4094>
Addsordeletesaduplicaterule.
zte(cfg-nas)#cleariptvchannel{name<channel-name>|id-list
<channel-list>|all}
Deletesachannel.
zte(cfg-nas)#cleariptvpackage{name<package-name>|id-list
<package-idlist>|all}
Deletesapackage.
zte(cfg-nas)#cleariptvview-profile{name<viewfile-name>|
id-list<viewfile-lis>|all}
Deletesapreviewconguration
le.
zte(cfg-nas)#cleariptvport<portlist>[vlan<1-4094>]package
{name<package-name>|id-llist<package-idlist>}
Deletesthepackageallocatedfor
users.
5-29
SJ-20130731155059-002|2013-11-27(R1.0)ZTEProprietaryandCondential