ZyXEL Communications IES-1248-51 - Figure 58 Select Ports

IES-1248-51/51A/53 User’s Guide
122 Chapter 16 xDSL Port Setup
Copy Port
Paste
Do the following to copy settings from one DSL port to another DSL port or ports.
1 Select the number of the DSL port from which you want to copy
settings.
2 Select the settings that you want to copy.
3 Click Paste and the following screen appears.
4 Select to which ports you want to copy the settings. Use All to
select every port. Use None to clear all of the check boxes.
5 Click Apply to paste the settings.
Figure 58 Select Ports
Active Select this check box to copy this port’s active setting. This is configured in the
xDSL Port Setting screen (see Section 16.7.1 on page 123).
Customer Info Select this check box to copy this port’s subscriber information. This is
configured in the xDSL Port Setting screen (see Section 16.7.1 on page 123).
Customer Tel Select this check box to copy this port’s subscriber’s telephone number. This is
configured in the xDSL Port Setting screen (see Section 16.7.1 on page 123).
2+ Features Select this check box to copy this port’s ADSL2+ feature settings. These are
configured in the xDSL Port Setting screen (see Section 16.7.1 on page 123).
Profile & Mode Select this check box to copy this port’s port profile settings and ADSL
operational mode. The port profile settings are configured in the xDSL Port
Profile Setup screens (see Chapter 17 on page 137). The ADSL operational
mode is configured in the xDSL Port Setting screen (see Section 16.7.1 on
page 123).
IGMP Filter Select this check box to copy this port’s IGMP filter settings. These are
configured in the IGMP Filter Profile screen (see Section 17.8 on page 148).
Security Select this check box to copy this port’s security settings. This is configured in
the Port Security screen (see Chapter 27 on page 197).
Frame Type Select this check box to copy this port’s allowed frame type. This is configured in
the Static VLAN Setting screen (see Chapter 25 on page 187).
Virtual Channels Select this check box to copy this port’s virtual channel settings. These are
configured in the VC Setup screen (see Section 16.9 on page 128).
Alarm Profile Select this check box to copy this port’s alarm profile. This is configured in the
Alarm Profile Setup screen (see Section 17.6 on page 145).
Table 19 xDSL Port Setup (continued)
LABEL DESCRIPTION