ZyXEL Communications IES-1248-51 - RPVC ARP Flush Command; RPVC ARP Show Command; Pppoa to Pppoe (PAE) Commands; PAE PVC Delete Command

IES-1248-51/51A/53 User’s Guide
Chapter 56 Virtual Channel Management 417
56.7.13 RPVC ARP Show Command
Syntax:
ras> adsl rpvc arp show
This command
displays how long the device stores the IP addresses of 2684 routed mode
gateways in the Address Resolution Protocol table.
The following is an example.
56.7.14 RPVC ARP Flush Command
Syntax:
ras> adsl rpvc arp flush
This command
clears the IP addresses of 2684 routed mode gateways from the Address
Resolution Protocol table.
56.8 PPPoA to PPPoE (PAE) Commands
You can use these commands to create PVCs for PAE translation.
56.8.1 PAE PVC Delete Command
Syntax:
ras> adsl paepvc delete <portlist> <vpi> <vci>
where
This command removes a PAE PVC.
Figure 293 RPVC ARP Agingtime Show Command Example
ras> adsl rpvc arp show
gateway ip vid mac
--------------- ---- -----------------
192.168.10.102 1 00:0d:9d:d9:43:3b
<portlist> =
The port number of the PAE PVC. You can specify a single
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.