ZyXEL Communications IES-1248-51 - Firmware File Upgrade; Figure 218 Example: Enter the Management Password; Figure 219 Example: Upload the Configuration File Config-0; Figure 220 Example: Close FTP Client

IES-1248-51/51A/53 User’s Guide
Chapter 53 Firmware and Configuration File Maintenance 357
Enter the management password (1234 by default).
Use
put to transfer the configuration file from the computer. The configuration file on the
system is named
config-0.
Quit FTP.
Wait for the update to finish. The system restarts automatically.
53.4 Firmware File Upgrade
Use the following procedure to upload firmware to the IES-1248.
Use an FTP client to connect to the IES-1248.
Enter the management password (
1234 by default).
Figure 218 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 219 Example: Upload the Configuration File config-0
ftp> put xxx.dat config-0
Figure 220 Example: Close FTP Client
ftp> quit
Figure 221 Example: Use an FTP Client to Connect to the IES-1248
C:\> ftp <IES-1248 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Figure 222 Example: Enter the Management Password
Password: 1234
230 Logged in