ZyXEL Communications IES-1248-51 - ACL Assignment Commands; ACL Assignment Set Command; Figure 302 ACL Profile Show Command Example

IES-1248-51/51A/53 User’s Guide
428 Chapter 57 ACL Commands
where
This command lists the names of every ACL profile or displays the detailed settings of the
specified ACL profile.
Figure 302 ACL Profile Show Command Example
57.2 ACL Assignment Commands
Use these commands to apply ACL profiles to PVCs.
57.2.1 ACL Assignment Set Command
Syntax:
ras> switch acl set <portlist> <vpi> <vci> <profile>
where
This command allows you to apply an ACL profile to the specified port(s). You can apply up
to eight profiles to a subscriber port.
The following example applies the ACL profile “test” to a PVC.
<name> =
The name of the ACL profile.
ras> switch acl profile show test
profile test:
rule:
vlan :10
priority:2
action:
rpri :7
rate :1000
<portlist> =
The port number of the PVC. You can specify a single ADSL
port <1>, all ADSL ports <*> or a list of ADSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PVC.
<vci> =
The VCI of the PVC.
<profile> =
The name of the ACL profile.