IES-1248-51/51A/53 User’s Guide
160 Chapter 19 VLAN
19.4 Static VLAN Setting Screen
You can assign a port to be a member of a VLAN group or prohibit a port from joining a
VLAN group in this screen. This is an IEEE 802.1Q VLAN.
To open this screen, click Advanced Application, VLAN, Static VLAN Setting.
Figure 76 Static VLAN Setting
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
Status This field shows that this VLAN was added to the IES-1248 statically, that is,
added as a permanent entry.
Poll Interval(s)
Set Interval
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Stop Click Stop to halt polling statistics.
Previous Page
Next Page
Click one of these buttons to show the preceding/following screen if the
information cannot be displayed in one screen.
Table 32 VLAN Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
