ZyXEL Communications IES-1248-51 - Figure 78 Select Ports

IES-1248-51/51A/53 User’s Guide
Chapter 19 VLAN 163
Cancel Click Cancel to begin configuring this screen afresh.
Copy port
Paste
Do the following to copy settings from one port to another port or ports.
1 Select the number of the port from which you want to copy settings.
2 Click Paste and the following screen appears.
3 Select to which ports you want to copy the settings. Use All to
select every port. Use None to clear all of the check boxes.
4 Click Apply to paste the settings.
Figure 78 Select Ports
a. At the time of writing, the VLAN Acceptable Frame Type field is read-only for the Ethernet
ports. The IES-1248 accepts both tagged and untagged incoming frames on the Ethernet
ports.
Table 34 VLAN Port Setting (continued)
LABEL DESCRIPTION