ZyXEL Communications IES-1248-51 - PAE PVC Show Command; PAE PVC Session Command; Figure 295 PAE PVC Show Command Example

IES-1248-51/51A/53 User’s Guide
Chapter 56 Virtual Channel Management 419
56.8.3 PAE PVC Show Command
Syntax:
ras> adsl paepvc show <portlist> [<vpi> <vci>]
where
This command displays the PPPoA-to-PPPoE PVC settings for the specified port(s) or PVCs.
The following example displays the settings for port 1.
Figure 295 PAE PVC Show Command Example
56.8.4 PAE PVC Session Command
Syntax:
ras> adsl paepvc session <portlist> [<vpi> <vci>]
where
This command displays the status of PPPoA-to-PPPoE PVC sessions on the specified port(s)
or PVCs.
The following example displays the settings for port 1.
<portlist> =
The port number of the PAE PVC. You can specify a single
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.
ras> adsl paepvc show 1
port vpi vci pvid pri htime US/DS vcprofile/acname/srvcname
---- --- ----- ---- --- ----- -----------------------------------
1 1 33 1 0 10 dsprofile: DEFVAL
usprofile:
acname : vom
srvcname : video
<portlist> =
The port number of the PAE PVC. You can specify a single
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.