IES-1248-51/51A/53 User’s Guide
70 Chapter 5 Power Connections
5.2.2 DC Power Connections (IES-1248-51, IES-1248-53)
Note: When installing the IES-1248 power wire, push the wire firmly into the terminal
as deep as possible and make sure that no exposed (bare) wire can be seen or
touched.
1 Connect one end of a power wire to the – power terminal on the front panel of your IES-
1248 and tighten the terminal screw.
2 Connect the other end of the power wire to the -36 to -72 VDC terminal on the power
supply.
3 Repeat the previous step for the terminal labeled +.
5.3 Procedure to Turn on the IES-1248 Power
1 Turn on the power supply.
2 Move the IES-1248 power switch to the ON position.
To Next Page
Loading...
