ZyXEL Communications IES-1248-51 - Figure 260 Line Diagnostics Get 992.3 Command Example

IES-1248-51/51A/53 User’s Guide
390 Chapter 55 ADSL Commands
Use this command to display the line diagnostics results in the format defined in the ITU-T
G.992.3 standard after using the line diagnostics set command on an ADSL port. Use the line
diagnostics results to analyze problems with the physical ADSL line.
Note: Wait at least one minute after using the line diagnostic set command before
using this command.
The following example displays the line diagnostics results for ADSL port 1.
Figure 260 Line Diagnostics Get 992.3 Command Example
ras> adsl linediag getld992_3 1
port: 1
number_of_subcarries: 256 32
hlinScale: 17024 32767
latn: 2.0 0.2
satn: 2.0 0.0
snrm: -0.0 6.0
attndr: 10398468 1152000
farEndActatp: 20.4 12.4
i li.rl li.im log(dB) QLN(dBm) SNR(dB)
0 N/A N/A N/A N/A N/A
1 N/A N/A N/A N/A N/A
2 N/A N/A N/A N/A N/A
3 N/A N/A N/A N/A N/A
4 N/A N/A N/A N/A N/A
5 N/A N/A N/A N/A N/A
6 0.31557 0.00796 -9.9 -120.5 8.5
7 0.43477 -0.31599 -5.3 -120.0 42.0
8 0.28313 -0.67576 -2.6 -119.5 44.5
9 -0.01016 -0.86645 -1.1 -119.0 46.5
10 -0.28423 -0.89969 -0.4 -118.5 51.5
11 -0.48750 -0.85403 -0.1 -118.0 52.0
12 -0.63495 -0.79630 0.2 -118.0 54.5
13 -0.75373 -0.75644 0.6 -117.5 56.5
14 -0.84457 -0.72510 1.0 -117.0 56.5
15 -0.89389 -0.68549 1.1 -116.5 56.5
16 -0.90713 -0.64631 1.0 -114.5 56.5
17 -0.91955 -0.63196 1.0 -116.0 57.0
18 -0.95053 -0.64860 1.3 -116.0 57.0
19 -0.97781 -0.67563 1.6 -115.5 57.0
20 -0.97161 -0.69211 1.6 -115.5 57.5