ZyXEL Communications IES-1248-51 - Figure 100 Select Ports

IES-1248-51/51A/53 User’s Guide
198 Chapter 27 Port Security
Apply Click Apply to save your changes to the IES-1248’s volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Copy port
Paste
Do the following to copy settings from one port to another port or ports.
1 Select the number of the port from which you want to copy settings.
2 Click Paste and the following screen appears.
3 Select to which ports you want to copy the settings. Use All to
select every port. Use None to clear all of the check boxes.
4 Click Apply to paste the settings.
Figure 100 Select Ports
Table 54 Port Security (continued)
LABEL DESCRIPTION