ZyXEL Communications IES-1248-51 - DHCP Snoop Show Command; DHCP Counter Statistics Command; Figure 158 DHCP Snoop Show Command Example; Figure 159 DHCP Counter Statistics Command Example

IES-1248-51/51A/53 User’s Guide
Chapter 47 DHCP Commands 311
47.4.4 DHCP Snoop Show Command
Syntax:
ras> switch dhcpsnoop show <portlist>
where
Use this command to display the current DHCP snooping settings of the specified port(s). The
following example displays the settings of ports 1-5.
Figure 158 DHCP Snoop Show Command Example
47.4.5 DHCP Counter Statistics Command
Syntax:
ras> statistics dhcp counter [<portlist> [clear]]
where
Use this command to display a summary of DHCP packets on the specified port(s). The
following example displays the settings of port 1.
Figure 159 DHCP Counter Statistics Command Example
[portlist] =
You can specify a single port <1>, all ports <*> or a list of ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
ras> switch dhcpsnoop show 1~5
port enable
----- --------
1 V
2 -
3 -
4 -
5 -
<portlist> =
You can specify a single port <1>, all ports <*> or a list of ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
ras> statistics dhcp counter 1
port discover offer request ack overflow
----- -------- -------- -------- -------- --------
1 0 0 0 0 0