ZyXEL Communications IES-1248-51 - Chapter 56 Virtual Channel Management; Virtual Channel Management Overview; Virtual Channel Profile Commands; Show Virtual Channel Profile Command

IES-1248-51/51A/53 User’s Guide
Chapter 56 Virtual Channel Management 399
CHAPTER 56
Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
56.1 Virtual Channel Management Overview
See Chapter 16 on page 119 for background information on virtual channels and ATM QoS.
56.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
56.2.1 Show Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile show [vcprofile]
where
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
56.2.2 Set Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
where
[vcprofile] = The name of the virtual channel profile (up to 31 ASCII characters).
<vcprofile> =
The name of the virtual channel profile (up to 31 ASCII
characters). You cannot change the DEFVAL or DEFVAL_VC
profiles.
<vc|llc> =
The type of encapsulation (vc or llc).