ZyXEL Communications IES-1248-51 - PAE PVC Counter Command; Figure 296 PAE PVC Session Command Example; Figure 297 PAE PVC Counter Command Example

IES-1248-51/51A/53 User’s Guide
420 Chapter 56 Virtual Channel Management
Figure 296 PAE PVC Session Command Example
56.8.5 PAE PVC Counter Command
Syntax:
ras> adsl paepvc counter <portlist> [<vpi> <vci>]
where
This command displays statistics about PPPoA-to-PPPoE PVC activity.
The following example displays the statistics for port 1.
Figure 297 PAE PVC Counter Command Example
ras> adsl paepvc session 1
pvc 1-1/33
session state : down
session id : 0
session uptime: 0 secs
acname :
srvcname :
<portlist> =
The port number of the PAE PVC. You can specify a single
ADSL port <1>, all ADSL ports <*> or a list of ADSL ports
<1,3,5>. You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.
ras> adsl paepvc counter 1
pvc 1-1/33
tx rx
---------------- ----------------
ppp lcp config-request : - 0
ppp lcp echo-request : - 0
ppp lcp echo-reply : - 0
pppoe padi : 0 -
pppoe pado : - 0
pppoe padr : 0 -
pppoe pads : - 0
pppoe padt : 0 0
pppoe srvcname error : - 0
pppoe ac system error : - 0
pppoe generic error : 0 0